|
|
|
|
|
|
|
|
|
|
|
|
|
The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption. If an impact is hard enough, the covers will absorb the full blow, cracking or breaking in the process in order to prevent any transmission of shock to the handguard itself. Easy to replace, these covers ensure your rail will not take impact or scratch damage under a covered area, and allow your rifle to stand up to the harshest abuse you and it will go through!
Package Includes:
Features:
- Made to fit ALL M-Lok mounting surfaces.
- Ultra-slim textured surface provides extra dexterity and positive weapon control.
- Aggressive Non-Slip or Non-Reflective surface.
- Available in Black and FDE.
- Bi-directional.
- Sacrificial cover absorbs all impact, protecting your rail system.
- Each Kit contains Five (5) matching color M-Lok Panels.
Product Codes:
SI-MLOK-COVER-V1-BK
SI-MLOK-COVER-V1-FDE
|
The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption. If an impact is hard enough, the covers will absorb the full blow, cracking or breaking in the process in order to prevent any transmission of shock to the handguard itself. Easy to replace, these covers ensure your rail will not take impact or scratch damage under a covered area, and allow your rifle to stand up to the harshest abuse you and it will go through!
Package Includes:
Features:
- Made to fit ALL M-Lok mounting surfaces.
- Ultra-slim textured surface provides extra dexterity and positive weapon control.
- Aggressive Non-Slip or Non-Reflective surface.
- Available in Black and FDE.
- Bi-directional.
- Sacrificial cover absorbs all impact, protecting your rail system.
- Each Kit contains Five (5) matching color M-Lok Panels.
Product Codes:
SI-MLOK-COVER-V2-BK
SI-MLOK-COVER-V2-FDE
|
The Strike Industries Extended Magazine Plate (E.M.P+5 for the PMAG M3) design provides smoother, faster magazine reloading, and handling. It provides multiple functions to include additional 5 round capacity.
Package Includes:
- 1x Enhanced Magazine Plate +5
Features:
- Finger groove for enhanced grip and easy pull from mag-well and pouch.
- Plus 5 round capacity
Product Codes:
SI-EMP-5-BK
SI-EMP-5-FDE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you've ever wanted faster and reliable magazine reloads, practice makes perfect. You aren't gonna be a superstar overnight. But a little help never hurts. This is why Strike Industries has developed the Fang Trigger Guard. Our trigger guard has a stubby magazine assist "fang" that protrudes to allow with quicker and more accurate reload insertion of the magazine. The Fang Trigger Guard is made of high quality polymer and is light weight with a great look and feel that is only matched with its performance. The fang will help guide your magazine into the magwell on a much more dependable basis. It's a simple, helpful guide that can be used from the beginner to the more advanced. You have to get the feel for the timing and mechanics of a quick and clean reload, getting a competitive edge is just the smart thing to do. Try the Strike Industries Fang Trigger Guard and bite back against failed reload attempts.
Package include:
- 1 x Fang Trigger guard
- 1 x Roll Pin
- 1 x Set screw
Features:
- Nylon reinforced polymer
- Magazine reload assist
- Finger rest function
- Cleaner, faster reloads
- Use as a finger rest
- Light weight at .2 oz
Product Codes:
SI-COBRA-FANG-BK
SI-COBRA-FANG-FDE
|
The LINK Anchor Handstop is made from a heat resistant polymer that allows comfortable grip in any shooting condition. It has a low profile design that allows mounting through any MLOK or KeyMod openings. The unique tooth design allows the handstop to be reversible, giving the option for either a "push" or "pull" style grip. With the added ridges on the surface, the LINK Anchor provides unmatched dexterity from your palm to the fingertips. A true lightweight modification that is not only comfortable , has an aggressive look, and will improve accuracy over time by a stabilizing your grip.
Compatible with all MLOK / Keymod Handguards.
Product Features:
- Aggressive ergonomic grip with ridges to enhance dexterity
- Low profile, light weight, heat resistant design
- LINK attachment system
- Multi-directional attachment capabilities
Product Specifications:
- Weight: .5oz
- Height: 27mm
- Width: 22mm
- Length: 75mm
- Material: Fiber filled 30% polymer
- Finish: EDM Texture
Package Includes:
- 1X - Link Anchor
- 2X - Sets of LINK Screw & Nut
- 1X - 3/32 HEX Tool
|
The Strike Mini HandStop with Cable Management System® – a compact sized accessory for enhanced firearm control and cable organization. This lightweight, high-strength impact resistant handstop features the patent-pending SI Cable Management System® (CMS), offering versatile cable routing options, such as alongside, across, 90-degrees, U-shape or Z-shape, and excess wire storage for a clutter-free shooting experience. Designed for single M-LOK slot attachment with a compact 1.70" (43.18mm) overall length, the Strike Mini HandStop provides a rearward angle pull style grip option for superior weapon manipulation control. The textured front and rear finger areas ensure a secure grasp, while the built-in front and rear barricade stops provide additional stability. Made from the custom blended SI Polymer Extreme material, this handstop guarantees durability and performance under the most demanding conditions. Upgrade your firearm with the Strike Mini HandStop with Cable Management System® and experience the difference in control and organization.
Package Contents:
- x1 Strike Mini HandStop with Cable Management System®
- x2 Screw
- x2 Nut
- x1 Torx key [T20]
- x1 Loctite® Threadlocker Blue 243®
- x1 Warning card
Product Features:
- Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)
- Single M-LOK slot attachment with 1.70" (43.18mm) overall length
- Cables can be routed: alongside, across, 90-degrees, U-shape or Z-shape
- Rearward angle for pull style grip options for better weapon manipulation control
- Textured front and rear finger areas for better grasp
- Built-in front and rear barricade stop
- Lightweight
- High-strength impact resistant custom blended SI Polymer Extreme material
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(1) Strike Industries AR-15 Enhanced Ultimate Dust Cover
The patent pending SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!
NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original to be compatible with all AR15 receivers on the market and at the same time makes it even lighter weighing in at only 0.3oz!
Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal then ever before! The patent pending UDC-E (Ultimate Dust Cover- Enhanced Version) is the modified version of the original UDC for mil-spec receivers.
Product Specs
- Length: 3.46in
- Weight: .3oz
- Materials: Polymer
- Color: Black or FDE
Package includes:
- 1x Dust Cover
- 1x Spring
- 1x Pin
Features:
- Patent pending spring-loaded, internal detent rod for easy installation and take-down.
- Constructed with lightweight durable polymer material weighing in at only .3oz!!!
- Cut-out window for easy disassembly on any AR15 receiver!
- Will never corrode rust or fade
- Will never deform or get bent out of shape
- Comes in a variety of designs
- Patent pending "True Seal" internal lip that seals the port tighter than traditional dust cover designs.
- Built-in adjustable detent set screw to compensate for wear on the receiver.
Product Codes:
SI-AR-UDC-E-01-223-BK
SI-AR-UDC-E-01-223-FDE
SI-AR-UDC-E-FLAG-BK
SI-AR-UDC-E-FLAG-FDE
SI-AR-UDC-E-03-223-BK
SI-AR-UDC-E-03-223-FDE
|
The patent pending SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!
NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original weighing in at only 0.4oz!
Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal than ever before!
Package includes:
- 1x Dust Cover
- 1x Spring
- 1x Pin
Features:
- Patent pending spring-loaded, internal detent rod for easy installation and take-down.
- Constructed with lightweight durable polymer material
- Will never corrode rust or fade
- Will never deform or get bent out of shape
- Comes in a variety of designs
- Patent pending, True Seal internal lip that seals the port tighter than traditional dust cover designs.
- Built-in adjustable detent set screw to compensate for wear on the receiver.
Note:for the AR-10 308
The SI UDC has been tested and fits on Mega Arms MATEN, DPMS Oracle, SIG 716, YHM, and SW perfectly. It is easily modified to fit other receivers with light sanding.
The 308 UDC-E is not guaranteed to fit all receivers nor be able to be modified to fit due to there being no standard for the AR10 platform.
Product Codes:
SI-AR-UDC-E-308-BK
SI-AR-UDC-E-308-FDE
|
The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.
Package Contents:
- x2 M-LOK Cable Management Covers (Long) or x4 M-LOK Cable Management Covers (Short)
- x4 Screw
- x4 Nut
- x1 Torx tool [T20]
- x1 Loctite® Threadlocker Blue 243®
Product Features:
- Built-in Cable Management System® w/ excess wire storage (patent pending)
- Cables can be routed: alongside, across, 90-degrees or U-shape
- Positive tactile feeling
- Minimizes heat transfer
- Increased comfort
- Protection against sharp rail slot edges
- Made from durable and lightweight polymer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Strike Industries LINK Angled HandStop with Cable Management System® is a rearward angle setup for pull style grip options for better weapon manipulation control. This rail attachment assists in pulling the weapon into the shooters shoulder which aids in additional control and mitigating recoil. Textured front and rear finger areas for better grasp plus built-in front and rear barricade stop. The SI patented LINK system allows mounting onto both M-LOK and KeyMod compatible devices for a bigger variety of applications. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Lightweight high-strength impact resistant custom blended SI Polymer Extreme material with a size and design to fit a wide variety of hands, the SI LINK Angled HandStop with Cable Management System® is an excellent way to increase shootability of your weapon.
COMPATIBILITY: M-LOK and KeyMod
Package Contents:
- x1 LINK Angled HandStop with Cable Management
- x2 Screw
- x2 Nut
- x1 Torx key [T20]
- x1 Loctite® Threadlocker Blue 243®
- x1 Warning card
Product Features:
- Patented SI LINK mounting system (M-LOK and KeyMod compatible)
- Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)
- Cables can be routed: alongside, across, 90-degrees or U-shape
- Rearward angle for pull style grip options for better weapon manipulation control
- Textured front and rear finger areas for better grasp
- Built-in front and rear barricade stop
- Lightweight
- High-strength impact resistant custom blended SI Polymer Extreme material
|
The Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 is the next iteration of our Ultimate Dust Cover (UDC). The upgraded UDC design with double injection mold and overmolded rubberized soft sealing lip for better seal to prevent debris and water from entering when the cover is closed. The SI patent pending "True Seal" internal lip seals the port tighter than traditional dust cover designs. The AR Overmolded UDC comes pre-assembled with all the parts needed for a quick tool-less installation and easy disassembly using something as common as a pen or small point. Built into the UDC is an adjustable detent set screw to compensate for wear on the upper receiver. The SI patent pending noise-reduction rubber padding also makes it nearly 100% silent during activation. Made of overmolded high-strength impact resistant custom blended SI Polmer Extreme material, the SI AR Overmolded UDC does not deform or get bent out of shape. Resistant to rust unlike traditional steel covers, if the time ever comes, knowing you can remove and quickly reinstall makes this an easy cost-effective choice. Consider the Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 on a new build or when you are going to untorque the barrel nut as this is the easiest time to remove your old stamped steel dust cover to upgrade. Install AND remove any SI UDC in just 5 to 10 seconds.
Package Contents:
- x1 AR Overmolded Dust Cover
- x4 Rubber pads
Product Features:
- Upgraded UDC design with double injection mold and overmolded rubberized seal
- Quick tool-less installation and easy disassembly using something as common as a pen
- Patent pending "True Seal" internal lip seals the port tighter than traditional dust cover designs
- Overmolded soft sealing lip for better seal to prevent debris and water from entering when cover is closed-
- Built-in adjustable detent set screw to compensate for wear on upper receiver
- Patent pending noise-reduction rubber padding makes it nearly 100% silent during activation
- Made of overmolded high-strength SI Polymer Extreme material to not deform or get bent out of shape
- Resistant to rust unlike traditional steel covers
- Install AND remove the Overmolded Ultimate Dust Cover in just 5 to 10 seconds
COMPATIBILITY:
- AR-15 Mil-Spec upper receivers
- Aero Precision M4E1
NOT COMPATIBLE:
- Upper Receivers: VLTOR MUR: Modular Upper Receiver and ZRO Delta
- Lantac Enhanced BCG due to carrier and bolt design
|
The Strike industries cobra grip was developed using innovation and feedback from combat veterans. The cobra grip is made from advanced polymer which is very strong and will definitely take a beating. The shooter can use different grip techniques and allows the user to have a secure and comfortable grip in any situation or position. It features a ridged front face that allows you to brace the rifle against a table or a wall and because it is ridged, it will prevent any sliding during the recoil kick. Another unique feature is the Cobra "hood". It acts like a heat shield that will prevent the heat from going to your hands and gives your lead hand an ergonomic platform to use. The rear portion of the Cobra Grip can function as a hand stop. One advantage that the SI Cobra Grip has over its competitors is the friction lock design. Material has been removed from the center so when tightening the Main Screw, it will allow it to grip the rail system and thus preventing any wobbling due to lose fitment or over use of the grip. The Strike industries Cobra grip is slim and low profile which makes it very light weight. Shooters from all walks of life and different size hands can use the Strike Industries Cobra Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. It is very ergonomic and economical.
Product Specs:
Product Codes:
SI-CTFG-BK
SI-CTFG-FDE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.
Package Contents:
- x1 Link Cobra Fore Grip with Cable Management
- x2 Screw
- x2 Nut
- x1 Torx key [T20]
- x1 Loctite® Threadlocker Blue 243®
- x1 Warning card
Product Features:
- Patented SI LINK mounting system (M-LOK and KeyMod compatible)
- Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)
- Cables can be routed: alongside, across, 90-degrees or U-shape
- Multiple ergonomic grip options for better weapon manipulation control
- Designed to offer a barricade stop functionality with ridged face
- Lightweight
- High-strength impact resistant custom blended SI Polymer Extreme material
COMPATIBILITY: M-LOK and KeyMod
|
When Strike Industries began the design and development of the S3 Silent Strategic Sling they meticulously researched with the intent of creating a one of a kind sling system that gave the user both the strength and flexibility they require, coupled with seamless stealthy operational functions. Thus, they constructed a Nylon based sling with Kelvar loop attachments that cancel out any noise from friction of contact points. They've also added nylon covering over the YKK Hamerloc buckles to mask the sound of a quick detachment. We've put the sling through a series of rigorous stress tests to give the user powerful sling attachments that can withstand over 300 lbs of force without giving away any pliability. The S-3 is designed for optimal comfort, strength, and the guaranteed retention of the element of surprise!
Features:
- Nylon webbing is 1000D.
- Kevlar loop attachment points, can withstand more than 300lbs of force
- YKK Hamerloc buckles
- Double Stitched for added reinforcement
- Easily adjusts to be used as a two point sling or one point sling
- Buckles are covered to conceal any sound or any light reflection
Product Codes:
SI-S3-SLING-BK
SI-S3-SLING-CM
|
The S3, Silent Strategic Sling, was created with simplicity and stealth in mind. However, the lightweight sling isn’t always ideal for extended carry, or for heavier weapon systems. For those that don’t mind a little extra bulk, the S3 PRO is perfect for those looking for an ultra comfortable sling. Just like the original S3 Sling, the S3 Pro features silent operations, while adding a padded rear section to distribute weight. Additionally, the S3 PRO features an integrated elastic storage section ideal for tourniquet storage.
Give your shoulder a break with the S3 Pro Padded Sling
Product Specs:
- Material: 1000D Nylon, 3mm Spacer Mesh
- Padding: 8mm EVA, 8mm Foam
Webbing:
- 1" Nylon Tubular webbing
- 1” Nylon Webbing
- 6” elastic webbing
- 1 1/2” elastic webbing
- 1” elastic webbing
Sling includes:
- 4mm paracord
- 1” YKK buckle
- 1” YKK Ladder adjuster
- 1” YKK loop
- 1” YKK tri-bar adjuster
Package includes:
Features:
- Nylon webbing is 1000D.
- YKK Hamerloc buckles
- Double Stitched for added reinforcement
- Easily adjusts to be used as a two point sling or one point sling
- Comfortable padded shoulder section
- Tourniquet storage
|
|
|
|
|
|
|
|
|
|
|
|
Introducing the Strike Industries MOD2 Rifle Stock. Improving upon our MOD1 stock's minimalist design, we've beefed up the MOD2 to be more ergonomic, durable, and easier to use. Customers often ask for additional padding to a variety of our stocks and that's just what we've done.
With a wider cheek rest and overmolded rubber buttstock pad, shooters can really dig into their shoulders for a more comfortable and stabilized shooting experience.
For ease of adjusting length of pull, there is a larger lever with large textured accents for a solid grip, reducing the chance of slipping when using under pressure. That same lever is also what you'll be using to install the MOD2 stock onto the buffer tube, or remove. No tools or strained fingers necessary! Simply pull the front of the lever downwards to install over the buffer tube with ease.
Overmolded QD points are available on both side of the MOD2 stock so be sure to pick up some Quick Detach Sling Loops as well. Thanks to our patent pending Anti-Rattle Design, internal updates have also been made for an extremely snug fitment on a wide variety of buffer tubes.
For tightest fitment, consider our buffer tube which has been tested and recommended by the NTOA: Strike Industries Advanced Receiver Extension. The MOD2 stock is lightweight and durable due to our custom blended SI Polymer Extreme™ material.
In terms of modularity, the Strike MOD2 Stock is also customizable in that you can turn it from its more minimalistic crane style into a standard stock shape. This modular feature is one-of-a-kind with the linking bridge also able to house various tools for you to work on your gun if ever in a pinch (the modular piece will be sold separately and will be available for purchase in Q2 2024).
Package Contents:
Product Features:
- Modular Design for user to choose full stock or minimalist style (Coming Soon)
- Tight Fitment on Buffer Tubes from Patent Pending Anti-Rattle Design
- 2 Built-In QD Sockets
- Enlarged Adjustment Lever
- Wide Cheek Rest
- Overmolded Rubber Buttpad
- Made out of Polymer Extreme™
Compatibility:
- Mil-Spec AR Style Buffer Tubes
- Strike Industries Advanced Receiver Extension
Product Specs:
- Length: 7.07"
- Width: 1.9"
- Height: 4.39"
- Weight: 8.9oz
|
|
|
