You are here: Home > Base MOA > 20 MOA
Sort By:
Page of 2
Thompson Center Arms - Encore Picatinny Rail Scope Mount (46900 / 46902) Thompson Center Arms - Contender Picatinny Rail Scope Mount (46800 / 46802) EGW Browning BAR / BLR Long Action Picatinny Rail Scope Mount - (43500 / 43502)
Thompson Center Arms - Encore Picatinny Rail Scope Mount (46900 / 46902)
MSRP: $29.99
Sale Price: $26.99
JoeBob dun saved you $3.00!
Free Shipping
Thompson Center Arms - Contender Picatinny Rail Scope Mount (46800 / 46802)
MSRP: $29.99
Sale Price: $26.99
JoeBob dun saved you $3.00!
Free Shipping
EGW Browning BAR / BLR Long Action Picatinny Rail Scope Mount - (43500 / 43502)
MSRP: $29.99
Sale Price: $26.99
JoeBob dun saved you $3.00!
Free Shipping
Our Thompson Center Encore mount is made specific to the gun, and will fit both pistols and rifles.

Also fits the Thompson Center Pro Hunter, and the Pro Hunter FX Muzzleloader.

This Mount May Not Fit:
Encore Turkey

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware:
  • Center Spread: .838"
  • Overall Length: 5.488"
  • Height: 0.4"

Product Codes:
0 MOA - 46900
20 MOA - 46902
Our Thompson Center Contender mount is made specific to the gun, and will fit both rifles and pistols

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

EGW machines these in their shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Center Spread: .838"
  • Overall Length: 5.488"
  • Height: 0.4"
Product Codes:
0 MOA - 46800
20 MOA - 46802

Due to different barrel types, the enclosed screws may need to be shortened.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Features:
  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.187"
  • Overall Length: 5.488"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Fitment:
  • Browning BAR (all calibers)
  • Browning BLR Long Action
  • Browning BPR
  • Browning Short Trac
  • Benelli R1** (see below)

**This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.
Warne Mountain Tech Rail Savage Round Receiver - Short Action Warne Mountain Tech Rail Savage Round Receiver - Long Action Warne Mountain Tech Rail Ruger American Centerfire - Short Action
Warne Mountain Tech Rail Savage Round Receiver - Short Action
MSRP: $74.99
Sale Price: $29.95
JoeBob dun saved you $45.04!
Free Shipping
Warne Mountain Tech Rail Savage Round Receiver - Long Action
MSRP: $74.99
Sale Price: $29.95
JoeBob dun saved you $45.04!
Free Shipping
Warne Mountain Tech Rail Ruger American Centerfire - Short Action
MSRP: $74.99
Sale Price: $29.95
JoeBob dun saved you $45.04!
Free Shipping
"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Warne Mountain Tech Rail - Tikka T3 EGW Savage Edge/Axis Picatinny Rail Scope Mount EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - LONG ACTION
Warne Mountain Tech Rail - Tikka T3
MSRP: $74.99
Sale Price: $29.95
JoeBob dun saved you $45.04!
Free Shipping
EGW Savage Edge/Axis Picatinny Rail Scope Mount - #6 & #8 Screws
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - LONG ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
The Savage Edge mount is a picatinny style mount custom made and produced by EGW in Quakertown, PA for the new Savage Edge rifle. Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount
EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - SHORT ACTION EGW Savage 93 (1 5/8 Ejection Port) Tactical Picatinny Mount EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- SHORT ACTION
EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Savage 93 (1 5/8 Ejection Port) Tactical Picatinny Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
How To Find The Right Bases For A Savage Centerfire Rifle

Our Savage Flat Back mount works for short action older model Savage rifles that do not have an accu-trigger.

These mounts are available in 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 3.930" (distance between the two middle holes, center to center, on your receiver.)
  • Overall Length: 6.670"

Models:
0 MOA - 41200
20 MOA - 41202
EGW Savage 93 (1 5/8 Ejection Port) Tactical Picatinny Mount EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- LONG ACTION EGW Savage MK II (1 3/8 Ejection Port) Tactical Picatinny Mount EGW Remington 597 Picatinny Scope Mount
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- LONG ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Savage MK II (1 3/8 Ejection Port) Tactical Picatinny Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Remington 597 Picatinny Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
How To Find The Right Bases For A Savage Centerfire Rifle

Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing our scope mount.

Screw Diameters
#6 Screws - .13" diameter
#8 Screws - .16" diameter

Rifles requiring #8 screws (please check your individual rifle to be sure):
10/110 BA Stealth
10/110 Stealth Evolution
110 Scout
110 Wolverine
10 GRS
110 Tactical
110 Tactical LH
110 Tactical Desert
Christensen Arms Ridgeline

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

This mount is available in 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 4.630"
  • Overall Length: 7.458"

Models:
0 MOA - 41100
20 MOA - 41102
This mount comes standard with a bevel on both sides making it ambidextrous.

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.

Savage MK II mount - 1-3/8" ejection port The Savage MK II mount will also fit the Savage MK I.
If your gun is an older production Mark II, it will have a 1-3/8 ejection port.
New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount.

Please measure the size of your ejection port prior to ordering to ensure the right fit.*

These mounts are available in 0 or 20 MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 3.345"
  • Overall Length: 5.882"

Models:
0 MOA - 41500
20 MOA - 41502
The Remington 597 mount is made specific to the gun.

This mount is available with a 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Mounting
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Overall Length: 6.276"
  • Height: .4"

Models:
0 MOA - 40300
20 MOA - 40302
EGW Remington 700 Picatinny Tactical Scope Rail Mount- LONG ACTION EGW Remington 700 Picatinny Tactical Scope Rail Mount- SHORT ACTION EGW NEF/HNR Handi Rifle Picatinny Rail Scope Mount
EGW Remington 700 Picatinny Tactical Scope Rail Mount- LONG ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Remington 700 Picatinny Tactical Scope Rail Mount- SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
Remington 700 Picatinny Tactical Scope Rail Mount Remington 700 Picatinny Tactical Scope Rail Mount This mount fits the NEF/H&R Handi Rifle, it also fits the H&R Classic Carbine.

This base sits at approximately 0.4” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined From: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Only
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Hole 1 to 2: 1.30"
  • Hole 2 to 3: 1.0"
  • Overall Length of Mount: 6.276"
  • Made in the USA

Models
0 MOA - 46200
20 MOA - 46202
EGW Ruger 10-22 Picatinny Rail Scope Mount ( 46100 / 46102) EGW Ruger American Picatinny Tactical Scope Rail Mount- SHORT ACTION EGW CVA Cascade Short Action Picatinny Rail Scope Mount
EGW Ruger 10-22 Picatinny Rail Scope Mount ( 46100 / 46102)
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Ruger American Picatinny Tactical Scope Rail Mount- SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW CVA Cascade Short Action Picatinny Rail Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
The Ruger 10-22 mount is made specific for the 10-22.

This scope mount will not fit the 10-22 takedown.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Center Spread: 2.57"
  • Overall Length: 6.276"
  • Height: Approximately 0.4"
  • Type II Anodized
  • Made in the USA

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Models:
0 MOA: 46100
20MOA: 46102

EGW Ruger American Picatinny Tactical Scope Rail Mount- SHORT ACTION

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

This mount fits:
  • Ruger American Short Action Models
  • Ruger American Standard (In Short Action Calibers)
  • Ruger American Predator
  • Ruger American Compact
  • Ruger American Ranch
  • Ruger American Go Wild Camo (In Short Action Calibers)

Features:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Center Spread: 3.01"
  • Overall Length: 6.670"
  • Sits at approximately 0.4” high.
How To Find The Right Bases For A Savage Centerfire Rifle

Need a scope mount for your CVA Cascade? Our one piece CVA Cascade Short Action 0 MOA picatinny scope mount can help. Utilizing a multi-slot design, our scope base allows your scope rings to be mounted virtually anywhere along the base for a quick and easy mounting process.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite.

  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.265"
  • Overall Length: 6.670"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Product Numbers:
0 MOA: 46620
20 MOA: 46622
EGW CVA Cascade Long Action Picatinny Rail Scope Mount EGW Mossberg MVP 5.56 Picatinny Tactical Rail Scope Mount EGW Mossberg Patriot / MVP 7.62 Picatinny Tactical Rail Scope Mount - Short Action
EGW CVA Cascade Long Action Picatinny Rail Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Mossberg MVP 5.56 Picatinny Tactical Rail Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Mossberg Patriot / MVP 7.62 Picatinny Tactical Rail Scope Mount - Short Action
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
How To Find The Right Bases For A Savage Centerfire Rifle

Need a scope mount for your CVA Cascade? Our one piece CVA Cascade Short Action 0 MOA picatinny scope mount can help. Utilizing a multi-slot design, our scope base allows your scope rings to be mounted virtually anywhere along the base for a quick and easy mounting process.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite.

  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 4.11"
  • Overall Length: 7.458"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Product Numbers:
0 MOA: 46630
20 MOA: 46632
Made for the 5.56/.223 will NOT fit the 7.62/.308 MVP.

This mount comes standard with a bevel on both sides making it ambidextrous.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

This mount fits:
Mossberg MVP 5.56
Mossberg MVP .204

Specifications:
  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.02"
  • Overall Length: 5.882"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Product Numbers:

0 MOA: 45600
20 MOA: 45602
This mount comes standard with a bevel on both sides making it ambidextrous.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

This mount fits:

Mossberg MVP 7.62
Mossberg MVP 6.5 Creedmoor
Mossberg Patriot Short Action
Mossberg 100 ATR Short Action

Specifications:
  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 4.168"
  • Overall Length: 6.670"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Product Numbers:

0 MOA: 45700
20 MOA: 45702
EGW Savage A17 / A22 Picatinny Rail Scope Mount - 41800 / 41802 EGW Tikka T3/T3X Picatinny Rail Scope Mount Warne Mountain Tech Rail Howa 1500 / Weatherby Vanguard - Short Action
EGW Savage A17 / A22 Picatinny Rail Scope Mount - 41980 / 41982
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
EGW Tikka T3/T3X Picatinny Rail Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Free Shipping
Warne Mountain Tech Rail Howa 1500 / Weatherby Vanguard - Short Action
MSRP: $74.99
Sale Price: $39.95
JoeBob dun saved you $35.04!
Free Shipping
Our Savage A17 / A22 mount is made specific to the gun.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite.

Features:
  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.181"
  • Overall Length: 5.882"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included


Fitment:
  • Savage A17
  • Savage A22
Our Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite and T3X Rifles. The T3X rifle has an extra hole in the receiver that our rail covers up and does not use.

Our Tikka T3 mount is provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled at tapped for 6-48 screws. Your gun may require metric screws. If you require metric screws, please select that option. We are happy to provide whichever size screws you need.

Tikka rifles are known to have debris left in the screw hole, which may require the threaded holes be cleaned out using a bottoming tap.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite.

Features:
  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.245"
  • Overall Length: 7.458"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included



Fitment:
  • Tikka T3x Superlite Camo
  • Tikka T3x Superlite
  • Tikka T3x Compact
  • Tikka T3x Lite
  • Tikka T3x Lite Stainless
  • Tikka T3x Compact Tactical Rifle
  • Tikka T3x Varmint
  • Tikka T3x Laminated Stainless
  • Tikka T3x Forest
  • Tikka T3x Hunter Stainless
  • Tikka T3x Hunter
  • Tikka T3 Hunter
  • Tikka T3 Laminated Stainless
  • Tikka T3 Varmint
  • Tikka T3 Super Varmint
  • Tikka T3 Varmint Stainless
  • Tikka T3 Compact Tactical

Note: Pre 2004 Tikka Rifles May Require Metric Screws.

"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Warne Mountain Tech Rail Remington 700 - Short Action Warne Mountain Tech Rail Remington 700 - Long Action EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- SHORT ACTION
Warne Mountain Tech Rail Remington 700 - Short Action
MSRP: $74.99
Sale Price: $39.95
JoeBob dun saved you $35.04!
Free Shipping
Warne Mountain Tech Rail Remington 700 - Long Action
MSRP: $74.99
Sale Price: $39.95
JoeBob dun saved you $35.04!
Free Shipping
EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- SHORT ACTION
MSRP: $69.99
Sale Price: $62.99
JoeBob dun saved you $7.00!
Free Shipping
"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
"Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Bases feature black zinc coated hardware for "Element Proof" protection.
  • Self centering tapered T-15 Torx screws.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.

EGW 80000 mounts manufactured after 12/2020 are drilled to accommodate larger diameter screws (#8-40) and now come with #6-48 and #8-40 screws. The head diameter on the #6-48 screws provided with this mount is larger than our normal #6-48 screws.

If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Remington Customer Support at
1-800-243-9700 and supply them with your serial number.

The blue bag of screws provided are #6-48 screws.

The red bag of screws provided are #8-40 screws.

Mounting Hardware Is Included

This mount fits:
Bergara B14 (#6 Screws)
Bergara B14R
Bergara Short Action Premier Series (#8 Screws)
Christensen Arms Short Action (Please Check Your Serial Number Here)
CVA Paramount
CVA Paramount Pro
Defiance Machine Stryker Ridge Short Action (#8 screws)
Remington 700 Short Action
Remington 700 Ultimate Muzzleloader
Remington 722 Short Action
Remington 40X Short Action
Remington 700 Short Action (#8 screws)
Remington 700 Short Action Police Tactical (#8 screws)
Remington 700 Short Action LTR (#8 screws)
Remington 722 Short Action (#8 screws)
Remington 40x Short Action (#8 screws)

This mount is too low to work on the Remington 700 PCR.

Rail Type: One Piece Picatinny
Machined From:
Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Hardcoat
Center Spread: 3.627"
Overall Length of Mount: 6.276"
Height: .35" (Top of Receiver to Top of Picatinny)
Weight: 2.5 oz
Quick Disconnect Ring Compatible: Yes
Ambidextrous: Yes
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: #6-48 X 1/4 Screws, #8-40 X 1/4" Screws and T-10 Bit Included
Torque Specs: 20 in/lbs


This mount comes standard with a bevel on both sides making it ambidextrous.

The bolt pattern on our Remington 700 Short Action mount fits Short Action Remington 700 rifles (example 223, 308), as well as the 722 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
30 MOA - if shooting 1000-1500 yards
40 MOA - if shooting 1500+ yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.