|
Rifle: AR-15, M-16. Sizes: Small .154 dia.; Small .1555 dia.; Large .170 dia. Stainless steel pins. Match grade stainless steel replacement pins for trigger and hammer. CNC machined for correct fit. The .1555 dia. pins are designed to tighten up worn receivers or to be installed in new receivers with match trigger sets to remove all free play. These will fit in new receivers without any machine work.(.1555 - will not fit Jewell Trigger System.)
|
These are the Generation 2 pin sets. These are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-auto 9mm and .223 suppressed weapons. The pins are stainless steel pins. End retainers are black oxide, dark earth, or OD green. Connectors have phosphate finish. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 Allen wrenches included. No modification to gun required.
The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. The .1555 will not fit Jewell Trigger System.
The .170 size fits late model Colts.
For Rock River National Match triggers use the .1555 only.
There is no strength difference between the Gen 2 and Gen 2 Mod 2 sideplates. The only difference is cosmetic.
|
These are the Generation 2 Mod 2 pin sets. They are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-automatic 9mm and .223 suppressed weapons.
The pins are stainless steel pins. End retainers are black oxide, dark earth, or OD green. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 Allen wrenches included. No modification to gun required.
The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. The .1555 will not fit Jewell Trigger System.
The .170 size fits late model Colts.
For Rock River National Match triggers use the .1555 only.
There is no difference in strength between the Gen 2 and the Gen 2 Mod 2 side plates. The only difference is cosmetic.
|
