The MOE (Magpul Original Equipment) Enhanced Trigger Guard is a polymer drop-in replacement for the AR15 / M4 weapons platform. This upgraded trigger guard is easily installed without the use of specialized tools, using three set screws to secure it to the lower receiver. This eliminates the need to install a roll pin with a hammer and punch and greatly reduces the chance of any damage to the receiver due to improper installation or out-of-spec receivers. The Enhanced Trigger Guard has an ergonomic and enlarged design to accommodate use with gloves or when shooting in cold environments and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.

All mounting hardware included.

Made in the U.S.A.

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection.

Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package.

Manufactured by Falcon Industries, Inc.

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

Made in U.S.A.

Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for the AR15 / M4 that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.

With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform.

All mounting hardware and a basic grip cap included.

Made in the USA.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.

Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

Made in the USA.

The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.

All mounting hardware included.

Made in the USA.

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15 / M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.

With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform.

All mounting hardware and a basic grip cap included.

Made in the USA.

• Approximately 25% larger than MOE-K2 Grip
• More vertical angle provides optimal hand position for modern shooting techniques
• Beavertail backstrap for enhanced ergonomics
• Design supports proper trigger finger placement
• Storage core capability accepts proprietary XL grip cap and oil bottle grip core
• Not compatible with current grip cores

• Attachment: M-LOK Slots
• Weight, w/ hardware: 1.5 oz.
• Materials: Polymer and QPQ ferritic nitrocarburize finished steel
• Dimensions: 1.77L x 1.03W x 1.2H in. (over rail surface)

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15 / M4 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o\clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc.

Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in the USA.

• Installation wrench included.
• Made in the USA.

• Platform: Shotgun
• Compatibility: Compatible with Remington 870 12ga shotguns.
• NOTE: Not compatible with the Remington 870 Super Mag. Not compatible with heat shields.

The MOE Fixed Carbine Stock - Mil-Spec model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for Mil-Spec size carbine-length buffer tubes.

The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP® Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.

Made in the USA.

The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

Its smaller size allows mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.

Made in the USA.

The MS1® Sling is the most versatile addition to the Magpul® line of rifle slings. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards. The MS1 allows easy shoulder transitions, rapid adjustability for hands-free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter for the sling (such as our Paraclip™, QDM or QD Sling Swivel), you can easily configure your MS1 for your fit and carry needs.

In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.

Features

• Replaces standard M4 Carbine-type plastic hand guards
• Compatible with most piston-driven as well as 'direct impingement' gas systems
• Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
• M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
• Reinforced, heat-resistant polymer construction
• Integral riveted aluminum heat shield
• Front lip and side extensions, shields hand from hot gas block
• Relieved area at the top rear accommodates many overhanging optic mounts

Specifications

• MOE M-LOK Hand Guard, Carbine-Length
  • Weight: 6.8 oz.
  • Length, overall: 7.1 in.
  • Length, mounting: 6.6 in.
  • Height, excluding lip: 2.5 in.
  • Width, max: 2.2 in.

The MOE SL® Hand Guard, Carbine-Length – AR15/M4 for firearms with carbine-length gas systems and an A2 front sight* provides modular flexibility with M-LOK® accessory slots in a lightweight, sleek, cost-effective design. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other direct-attach M-LOK accessories for the mounting of tactical lights, slings, grips, etc.

Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. A large front extension and lower lip protects the user from the hot front sight assembly and maximizes useable hand guard length.

• Narrow design replaces bulky M4 Carbine-type plastic hand guards
• Easy to install utilizing existing delta ring and round front hand guard retaining cap with A2 front sight assembly*
• Slots at the two, six, and ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
• Reinforced, heat-resistant polymer construction
• Integral riveted aluminum heat shield
• Front lip and long side extensions shields hand from hot sight assembly

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M16 rifles with rifle-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

Features

• Replaces standard plastic M16-type rifle-length hand guards
• Compatible with both 'direct impingement' and most piston-driven gas systems
• Easy to install utilizing existing delta ring and triangular or round front hand guard retaining cap
• M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
• Reinforced, heat-resistant polymer construction
• Integral riveted aluminum heat shield
• Front lip and side extensions, shields hand from hot gas block
• Relieved area at the top rear accommodates most overhanging optic mounts

Specifications

• MOE M-LOK Hand Guard, Rifle-Length
  • Weight: 12.1 oz.
  • Length, overall: 12.6 in.
  • Length, mounting: 12.0 in.
  • Height, excluding lip: 2.5 in.
  • Width, max: 2.2 in.

• Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
• Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
• Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
• Reinforced, heat-resistant polymer construction
• Integral, black oxide coated stainless steel heat shield
• Front lip and long side extensions shields hand from hot barrel while providing increased gripping surface
• Includes replacement polymer Top Cover
• Compatible with UltiMAK Optics Mount top cover
• Accepts factory cleaning rod

• Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
• Easy to install utilizing existing front hand guard retaining cap with sling loop*
• Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
• Reinforced, heat-resistant polymer construction
• Integral, black oxide coated stainless steel heat shield
• Front lip and side extension shields hand from hot barrel while still allowing use of factory sling loop
• Includes replacement polymer Top Cover
• Compatible with UltiMAK Optics Mount top cover
• Accepts factory cleaning rod

• Tool-less elevation adjustment and dual width enhanced front sight post, similar to MBUS Pro
• 0.44” high when folded and 1.15” wide at widest point
• Standard AR-height when deployed
• Polymer construction, smaller size provides light weight and resists operational abuse

• Position: Front
• Height above rail, stowed: 0.44 in.
• Platform: AR10, AR15, M4, M16, M110, SR25

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
• Sloping cheek weld combines a slim profile with user comfort
• Dual-side release latch provides easy adjustment while remaining anti-snag
• Premium chrome-silicon lock spring provides positive locking and long service life
• Compact rubber butt-pad offers an anti-slip surface and increases impact protection
• Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
• Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments
• 1.25" Footman's Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment
  

The MOE Carbine Stock - Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in the USA.

• Support-hand rest on front strap to minimize movement
• Bottom support acts as a bag rider for shooting rests

• Non-slip rubber butt-pad with rollover on the toe
• Sloping cheek weld combines a slim profile with user comfort
• Compatible with our Magpul CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles

• Shielded, ambidextrous release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life

• Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
• Rear M-LOK slot functions as a footman's loop for direct sling attachment, and can also accept the optional M-LOK® QD Sling Mount for push-button swivels
• Side mounting slots accept optional CTR® Cheek Risers for NON AR15/M4 applications
• Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP

• Collection: Collapsible Non-Storage AR Stocks
• Platform: AR10, AR15, M4, M16, M110, SR25
• Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others*
• LOP, M4 Collapsed: ~11.0 in.
• LOP, M4 Extended: ~14.3 in.
• LOP Adjustment Range: 3.3 in.
• Length, max: 7.4 in.
• Height, max: 5.3 in.
• Weight: 11.2 oz.
• Weight, w/ receiver extension: ~15.2 oz.
• Width, max: 1.6 in.

• Compatibility Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others*
• LOP, M4 Collapsed ~10.5 in.
• LOP, M4 Extended ~13.8 in.
• LOP Adjustment Range 3.3 in.
• Length, max 7.0 in.
• Height, max 5.3 in.
• Weight 8.0 oz.
• Weight, w/ receiver extension ~11.8 oz.
• Width, max 1.6 in.
• *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The MOE TR Carbine Stock will only fit with the common Mil-Spec tube.
• Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
• Will not interfere with single-point slings attached to ASAP or ASAP QD receiver end plates.

• Reversed lever at the front of the stock allows for LOP adjustment without breaking cheek weld

• Increased surface area for comfort

• M-LOK slot acts as a footman’s loop or allows for attachment of an M-LOK QD Sling Mount
• Accepts SL Enhanced Rubber Butt-Pad providing flexibility to optimally fit the shooter and their gear

• Platform: AR10, AR15, M4, M16, M110, SR25
• Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others*
• *Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
• NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The DT Carbine Stock will only fit with the common Mil-Spec tube.
• Will not interfere with single-point slings attached to ASAP or ASAP QD receiver end plates.