 |
The Griffin Armament Ambi Selector kit gives our customers three fully featured selector products that match the stylistic geometry of the Griffin Armament Suppressor Normalized Ambidextrous Configurable Handle (SN-ACH). Built around a heat treated ordnance grade steel central selector hub, two black nitride 17-4 selector paddles can be configured to the users needs whether the user is right or left handed. The hub incorporates a optional screw for trigger match style overtravel adjustment of standard AR-15 or M4/M-16 triggers, enhancing the human interfaced accuracy of the host firearm (enhanced shoot-ability). Overtravel adjustment reduces the time that the applied trigger pull weight is removed from the rifle during firing after the trigger break and prior to reaching the limit of travel. Reducing this time of lost equilibrium, reduces the wobble zone created by the removal of weight at the moment of break.
90 degree: Utilizing the traditional 90 degree pattern, this selector requires the manipulation you are familiar with and have come to expect in the AR-15 / AR10 family of firearms.
Over travel adjustment instructions: Reducing overtravel is as simple as removing the lower from the upper for safety, cocking the hammer, and tightening the screw till the trigger will not fire, then backing off the screw until the trigger press allows the hammer to fall, finally loosening an additional ¼ to 1/3 of turn to ensure reliability in all temperature conditions.
The kit includes screws and allen keys for installation.
⚠
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov.
|
|
|
