EGW 80000 mounts manufactured after 12/2020 are drilled to
accommodate larger diameter screws (#8-40) and now come with #6-48 and
#8-40 screws. The head diameter on the #6-48 screws provided with this
mount is larger than our normal #6-48 screws.
If you have
questions about your specific firearm, or need help regarding the
specific screw size, you should contact Remington Customer Support at 1-800-243-9700 and supply them with your serial number.
The blue bag of screws provided are #6-48 screws.
The red bag of screws provided are #8-40 screws.
Mounting Hardware Is Included
This mount fits:
Bergara B14 (#6 Screws)
Bergara B14R
Bergara Short Action Premier Series (#8 Screws)
Christensen Arms Short Action (Please Check Your Serial Number Here)
CVA Paramount
CVA Paramount Pro
Defiance Machine Stryker Ridge Short Action (#8 screws)
Remington 700 Short Action
Remington 700 Ultimate Muzzleloader
Remington 722 Short Action
Remington 40X Short Action
Remington 700 Short Action (#8 screws)
Remington 700 Short Action Police Tactical (#8 screws)
Remington 700 Short Action LTR (#8 screws)
Remington 722 Short Action (#8 screws)
Remington 40x Short Action (#8 screws)
This mount is too low to work on the Remington 700 PCR.
Rail Type: One Piece Picatinny
Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Hardcoat
Center Spread: 3.627"
Overall Length of Mount: 6.276"
Height: .35" (Top of Receiver to Top of Picatinny)
Weight: 2.5 oz
Quick Disconnect Ring Compatible: Yes
Ambidextrous: Yes
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: #6-48 X 1/4 Screws, #8-40 X 1/4" Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
This mount comes standard with a bevel on both sides making it ambidextrous.
The
bolt pattern on our Remington 700 Short Action mount fits Short Action
Remington 700 rifles (example 223, 308), as well as the 722 and 40x.
Despite what you may have heard, the Remington 700 mount will NOT fit
your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but
the remainder of the mount (ejection port, length, etc.) renders it
useless on these two guns.
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives
the shooter flexibility when mounting scope rings and other accessories.
Our one-piece scope mounts are the obvious choice for hunters and
tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
We machine these in our shop using one of our machining centers.
After machining, the mounts are tumbled, sand blasted, and Type III
anodized for long lasting durability.
We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
30 MOA - if shooting 1000-1500 yards
40 MOA - if shooting 1500+ yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Installation: We recommend 20 inch lbs of torque and a drip of blue
loctite (loctite is available through our website and is sold
separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
