Flash hider compatible with common .900″-24 adapters like the Q Plan-B and Rearden Atlas
- Allows for the quick attachment and removal of suppressors
- High strength 17-4 PH stainless steel
- Durable black nitride finish
- Standard 5/8-24 threads for use on 300BLK and 7.62 barrels
- 13/16" wrench flats for easy installation and removal
- Effectively hides muzzle flash
- Rotationally symmetric and does not need to be timed with shims
- Mass shifted tines to prevent ringing
- 2" overall length (~1.36" length added to muzzle)
- 1.9 ounces
Some suppressor companies do not warranty their products when used on aftermarket mounts or muzzle devices. Always check bullet stabilization before attaching a suppressor and always use an alignment rod to ensure the suppressor system is set up correctly. Comstock Armory will not be held liable for injury, death, or damage resulting from the use or misuse of this product.
**COM-4P-12-22-PW is NOT compatible with 9mm firearms.**
*1/2x28 (223/5.56)* - SKU: COM-4P-12-22-PW
- Overall Length: 2.14"
- Predrilled for pin/weld
- UPC: 850069580001
*5/8x24 (30Cal)* - SKU: COM-4P-58-30
- Overall Length: 2.00"
- NOT Predrilled for pin/weld
- UPC: 850069580018
